DY Gas Dryer - H Series

H-series High Temperature and Air-inletting Compressed Air Gas Dryer

The designing feature:

The gas dryer is well combined with screw compressor;
It uses integrated and high-efficiency cold indicator, which permits that the highest temperature of inletting gas can reach to 8 degC;
Air cooler makes use of tight plate fin heat exchanger, with small volume and high efficiency;
It has double-canisters and double-fans, with large wind and good effect of refrigerating;
Air-cooling unit is designed absorbing upside and wind discharging, no block;
Large and medium-sized units is double waterway, the cooling water is separate cycling system, no interference with each other;
The other features are the same with some of S-series units.

Refrigerant: R22

The Revision of Type-Choosing

Rated amount of disposing of chosen equipment= the flow rate of inletting air/ßp*ßt

Table 2 The Revising Modulus of Pressure ßp

Working pressure MPa	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0
ßp	0.65	0.80	0.88	0.92	1	1.05	1.12	1.25

Table 3 S-series The Revising Modulus of Temperature ßt

The temperature of inletting gas(degC)	20	25	30	35	38	40	42	45
ßt	1.25	1.15	1.10	1.05	1	0.95	0.88	0.80

Table 4 H-series the revising modulus of temperature ßt

The temperature of inletting gas (degC)	45	50	55	60	65	70	75	80
ßt	1.25	1.15	1.10	1.05	1	0.95	0.88	0.80

H-series Specification

Specification RD-S	The amount of disposing (Nm3/min)	Voltage	Electric Power ( Kw)	Exterior dimension Weight			Connecting pipeline of air	Pipeline of cooling water	Weight (Kg)
Specification RD-S	The amount of disposing (Nm3/min)	Voltage	Electric Power ( Kw)	L	W	H	Connecting pipeline of air	Pipeline of cooling water	Weight (Kg)
0006A	0.6	220v	0.24	540	400	485	G0.5”	/	27
0011A	1.1		0.48	780	435	910	G1”	/	50
0022A	2.2		0.95	780	435	910	G1.5”	/	60
0035A	3.5		0.95	780	435	910	G1.5”	/	85
0048A	4.8		1.0	1000	620	850	G2”	/	95
0065A/W	6.5		1.3	1000	620	1080	G2”	G0.5”	120
0085A/W	8.5		1.6	1000	620	1080	G2”	G0.5”	165
0120A/W	12	380v	2.5	1300	620	1080	G2”/DN70	G0.75”	240
0165A/W	16.5		3.3	1300	620	1080	G2”/DN70	G0.75”	280
0220A/W	22		4.8	1450	850	1600/1400	DN80	G0.75”	330
0270A/W	27		5.3	1450	850	1600/1400	DN80	G1”	385
0320A/W	32		6.2	1900	1000	1800/1600	DN100	G1.25”	450
0420A/W	42		8.0	2250	1140	2080/1880	DN100	G1.5”	600
0550A/W	55		9.4	2450	1140	2080/1880	DN100	G1.5”	650
0650A/W	65		11.6	2450	1290	2500/2300	DN100	G1.5”	850
0850W	85		14.8	2800	1290	2300	DN100	G2”	1050
1100W	110		18.4	2800	1290	2300	DN125	G1.5”*2	1300
1600W	160		29.8	3500	1600	2400	DN150	G2”*2	/
2100W	210		58.5	3500	1780	2700	DN200	G1.5”*3	/